Maintaining a clean and well-functioning pool cartridge filter system is essential for ensuring crystal-clear water and optimal pool performance. At Jeff's Pool Service, we understand the importance of proper filter maintenance, which is why we're here to guide you through the process. Follow these simple steps to clean your pool cartridge filter system and keep your pool sparkling clean all season long.

Step 1: Turn Off the Pump

Before you begin cleaning your pool cartridge filter system, it's crucial to turn off the pool pump to prevent any accidents or injuries. Locate the power switch or breaker for the pump and switch it off to cut off the power supply.

Step 2: Release Pressure

Next, relieve the pressure from the filter system by opening the air relief valve located on top of the filter tank. This will release any built-up pressure inside the tank and make it easier to remove the filter cartridges.

Step 3: Remove the Cartridges

Carefully remove the cartridges from the filter tank by loosening the locking mechanism or clamp that secures them in place. Take note of the orientation of the cartridges and the order in which they are stacked to ensure they are reinstalled correctly later.

Step 4: Rinse the Cartridges

Using a garden hose with a high-pressure nozzle, thoroughly rinse each cartridge to remove any debris, dirt, or algae buildup. Start from the top of the cartridge and work your way down, ensuring that all surfaces are cleaned.

Step 5: Soak the Cartridges

For a deeper clean, soak the cartridges in a solution of water and cartridge filter cleaner or a mild detergent. Allow the cartridges to soak for at least 24 hours to dissolve any stubborn contaminants.

Step 6: Scrub and Rinse Again

After soaking, scrub the cartridges gently with a soft-bristled brush to dislodge any remaining debris or buildup. Rinse the cartridges thoroughly once again to remove any loosened dirt or cleaner residue.

Step 7: Reinstall the Cartridges

Once the cartridges are clean and thoroughly rinsed, reinstall them in the filter tank in the same orientation and order as they were removed. Secure the cartridges in place with the locking mechanism or clamp.

Step 8: Restart the Pump

After reinstalling the cartridges, close the air relief valve and turn the pool pump back on to resume filtration. Monitor the filter system for any leaks or unusual noises to ensure everything is functioning properly.

Professional Service and Parts from Jeff's Pool Service

At Jeff's Pool Service, we offer professional pool filter cleaning services to ensure your cartridge filter system is thoroughly cleaned and maintained. Our experienced technicians will handle the entire cleaning process, from removing and cleaning the cartridges to reinstalling them and restarting the pump.

If you prefer to clean your pool filter system yourself, we also offer a wide selection of top-quality pool filter cartridges and cleaning supplies. Visit our website or contact us at (912)-554-0636 to purchase the parts you need or schedule professional pool filter cleaning service in Brunswick, St. Mary’s, and surrounding areas.

Contact Jeff's Pool Service Today

Maintain a clean and healthy pool with help from Jeff's Pool Service. Whether you need professional pool filter cleaning or quality replacement parts, we've got you covered. Contact us today to schedule service or purchase parts and accessories for your pool cartridge filter system.